Vinyl Ardore 507

5mm glue-down vinyl plank, 1505 x 235mm, 0.7mm wear layer, AC5; bathrooms allowed under warranty conditions.

5mm thick
0.7mm wear layer
235mm wide
PU coating

Range specifications

Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.

Dimensions

Thickness	5mm
Width	235mm
Length	1505mm
Pack size	2.12 m²
Boards per pack	6

Construction

Construction	LVT (luxury vinyl tile)
Wear layer	0.7mm

Surface

Finish	PU coating
Edge	No bevel

Installation

Profile / locking	None (glue-down)
Installation methods	direct stick, full-spread hard-set adhesive

Performance

AC rating	AC5 (AS/NZS 1859.3-2005)
Slip rating	AS 4586-2013 App. A: wet pendulum P2; oil-wet ramp R10
Emissions	ASTM D5116: VOC compliant; phthalate free; 100% virgin material, recyclable; GBCA listed
Certification	ISO 10874 / EN 685: commercial heavy, domestic very heavy

Warranty

Residential	30 years wear
Commercial	10 years wear
Structural	Lifetime

Subject to the manufacturer’s installation and care conditions.

Ardore 507 is a thicker vinyl plank: 5mm overall, 1505 x 235mm, with a 0.7mm wear layer under a PU coating and a square, unbevelled edge. It has a PVC friction-pad backing, and the current installation guide calls for full-spread hard-set adhesive, so plan on a glue-down install over a primed, levelled subfloor. The ten colours run from Ibis White through soft greys and earthy ash tones to Highland Blackbutt, Highland Spotted Gum and the dark, rustic Ceylonese. The plank won’t swell, so spills and damp mopping are fine, and the vinyl warranty allows bathrooms and laundries, subject to local waterproofing rules. It suits in-slab hydronic heating within the manufacturer’s limits. If you are in a strata building, ask us for the acoustic test data. Warranty is lifetime structural, 30 years residential wear and 10 years commercial, subject to the manufacturer’s installation and care conditions.

Will it suit your home?

Bathrooms & laundriesWith conditions
Can go in bathrooms and laundries if waterproofing rules are met; flood and leak damage isn't covered, and never flood-mop it.
Underfloor heatingWith conditions
Suits in-slab hydronic heating only, with the slab surface kept at 26°C or below; other heating types aren't recommended.
Sanding & refinishingNot applicable
Vinyl has a printed design layer under its wear layer, so it can't be sanded or refinished.
Pets & high trafficWith care
A 0.7mm heavy-duty wear layer suits busy homes, but claw scratches and pet accidents aren't covered; avoid rubber-backed mats.
Apartments (acoustic)Check strata rules
Its published acoustic result may fall short of typical strata targets, so check with us before choosing it for an apartment.