Ibis White
Across a whole room Ibis White looks calm and even, with a pale, bright face and a little movement in the grain. The smooth surface recalls oak left raw.
- 5mm thick
- 0.7mm wear layer
- 235mm wide
- PU coating
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesWith conditions
Can go in bathrooms and laundries if waterproofing rules are met; flood and leak damage isn't covered, and never flood-mop it.
- Underfloor heatingWith conditions
Suits in-slab hydronic heating only, with the slab surface kept at 26°C or below; other heating types aren't recommended.
- Sanding & refinishingNot applicable
Vinyl has a printed design layer under its wear layer, so it can't be sanded or refinished.
- Pets & high trafficWith care
A 0.7mm heavy-duty wear layer suits busy homes, but claw scratches and pet accidents aren't covered; avoid rubber-backed mats.
- Apartments (acoustic)Check strata rules
Its published acoustic result may fall short of typical strata targets, so check with us before choosing it for an apartment.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
Across a whole room Ibis White looks calm and even, with a pale, bright face and a little movement in the grain. The smooth surface recalls oak left raw.
Ardore 507 is a thicker vinyl plank: 5mm overall, 1505 x 235mm, with a 0.7mm wear layer under a PU coating and a square, unbevelled edge. It has a PVC friction-pad backing, and the current installation guide calls for full-spread hard-set adhesive, so plan on a glue-down install over a primed, levelled subfloor. The ten colours run from Ibis White through soft greys and earthy ash tones to Highland Blackbutt, Highland Spotted Gum and the dark, rustic Ceylonese. The plank won't swell, so spills and damp mopping are fine, and the vinyl warranty allows bathrooms and laundries, subject to local waterproofing rules. It suits in-slab hydronic heating within the manufacturer's limits. If you are in a strata building, ask us for the acoustic test data. Warranty is lifetime structural, 30 years residential wear and 10 years commercial, subject to the manufacturer's installation and care conditions.
Full specifications
Dimensions
| Thickness | 5mm |
|---|---|
| Width | 235mm |
| Length | 1505mm |
| Pack size | 2.12 m² |
| Boards per pack | 6 |
Construction
| Construction | LVT (luxury vinyl tile) |
|---|---|
| Wear layer | 0.7mm |
Surface
| Finish | PU coating |
|---|---|
| Edge | No bevel |
Installation
| Profile / locking | None (glue-down) |
|---|---|
| Installation methods | direct stick, full-spread hard-set adhesive |
Performance
| AC rating | AC5 (AS/NZS 1859.3-2005) |
|---|---|
| Slip rating | AS 4586-2013 App. A: wet pendulum P2; oil-wet ramp R10 |
| Emissions | ASTM D5116: VOC compliant; phthalate free; 100% virgin material, recyclable; GBCA listed |
| Certification | ISO 10874 / EN 685: commercial heavy, domestic very heavy |
Warranty
| Residential | 30 years wear |
|---|---|
| Commercial | 10 years wear |
| Structural | Lifetime |
Subject to the manufacturer’s installation and care conditions.
Documents
Like this floor? We’ll measure up and quote it properly.