Aqua is a 12.3mm laminate made with a low-swell HDF core under a printed décor and a hard-wearing AC5 surface. Boards are long and slim at 2200mm by 196mm, with micro-bevelled edges on all four sides and an embossed, matt surface that follows the printed grain. The range covers oak looks from pale bleached to grey and red-brown, plus Australian species prints such as Blackbutt and Spotted Gum. It floats over an approved underlay with a moisture barrier and joins with a Välinge 5G click system, no glue needed. The surface is water-resistant to everyday spills, but it is still laminate: wipe spills up promptly, never steam-mop, and don’t use it in bathrooms or laundries. The manufacturer states a 25-year residential warranty, subject to its installation and care conditions.
Aqua Laminate
12.3mm AC5 laminate, 2200 x 196mm, low-swell HDF core, 5G click. Spill-resistant, floats on underlay.

- 12.3mm thick
- 196mm wide
- Matt, UV
Range specifications
Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.
Dimensions
| Thickness | 12.3mm |
|---|---|
| Width | 196mm |
| Length | 2200mm |
| Pack size | 2.16 m² |
| Boards per pack | 5 |
Construction
| Construction | Laminate: aluminium-oxide wear layer, printed décor, low-swell HDF core, balancing back layer |
|---|---|
| Core | Low-swell HDF (Aqua Wud core) |
Surface
| Finish | Matt, UV |
|---|---|
| Surface | EIR (embossed in register) wood grain |
| Edge | Micro-bevel, 4 sides |
Installation
| Profile / locking | Välinge 5G click |
|---|---|
| Installation methods | floating over approved underlay with moisture barrier |
Performance
| AC rating | AC5 |
|---|---|
| Slip rating | P2 (AS 4586-2013) |
| Emissions | VOC < 0.05 ppm |
Warranty
| Residential | 25 years, wear and structural |
|---|---|
| Structural | Included in the 25-year residential warranty |
Subject to the manufacturer’s installation and care conditions.
Will it suit your home?
- Bathrooms & laundriesNot suitable
Not for bathrooms or laundries: laminate can swell if water gets into the joins, and moisture damage isn't covered by the warranty.
- Underfloor heatingNot confirmed yet
Talk to us before choosing this over underfloor heating; we'll get the current rules for your heating system in writing first.
- Sanding & refinishingNot applicable
Laminate has a printed design layer under its wear surface, so it can't be sanded or refinished.
- Pets & high trafficA good choice
AC5, a top abrasion rating, with good stain and impact resistance; wipe up pet accidents and standing water quickly.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published for this floor, so check with us and your strata by-laws before choosing it for an apartment.
Documents
Colours
Every colour, side by side.
Timber and timber-look floors vary board to board and batch to batch. See the real boards in a showroom before you choose.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Not sure between ranges?
Tell us about the room and we’ll suggest three floors that suit.
Like this floor? We’ll measure up and quote it properly.







