Oak Colonial
An oak print that mixes deeper brown boards with paler grey and tan streaks, giving an older, lived-in look suited to traditional rooms.
- 12.3mm thick
- 196mm wide
- Matt, UV
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesNot suitable
Not for bathrooms or laundries: laminate can swell if water gets into the joins, and moisture damage isn't covered by the warranty.
- Underfloor heatingNot confirmed yet
Talk to us before choosing this over underfloor heating; we'll get the current rules for your heating system in writing first.
- Sanding & refinishingNot applicable
Laminate has a printed design layer under its wear surface, so it can't be sanded or refinished.
- Pets & high trafficA good choice
AC5, a top abrasion rating, with good stain and impact resistance; wipe up pet accidents and standing water quickly.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published for this floor, so check with us and your strata by-laws before choosing it for an apartment.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
An oak print that mixes deeper brown boards with paler grey and tan streaks, giving an older, lived-in look suited to traditional rooms.
Aqua is a 12.3mm laminate made with a low-swell HDF core under a printed décor and a hard-wearing AC5 surface. Boards are long and slim at 2200mm by 196mm, with micro-bevelled edges on all four sides and an embossed, matt surface that follows the printed grain. The range covers oak looks from pale bleached to grey and red-brown, plus Australian species prints such as Blackbutt and Spotted Gum. It floats over an approved underlay with a moisture barrier and joins with a Välinge 5G click system, no glue needed. The surface is water-resistant to everyday spills, but it is still laminate: wipe spills up promptly, never steam-mop, and don't use it in bathrooms or laundries. The manufacturer states a 25-year residential warranty, subject to its installation and care conditions.
Full specifications
Dimensions
| Thickness | 12.3mm |
|---|---|
| Width | 196mm |
| Length | 2200mm |
| Pack size | 2.16 m² |
| Boards per pack | 5 |
Construction
| Construction | Laminate: aluminium-oxide wear layer, printed décor, low-swell HDF core, balancing back layer |
|---|---|
| Core | Low-swell HDF (Aqua Wud core) |
Surface
| Finish | Matt, UV |
|---|---|
| Surface | EIR (embossed in register) wood grain |
| Edge | Micro-bevel, 4 sides |
Installation
| Profile / locking | Välinge 5G click |
|---|---|
| Installation methods | floating over approved underlay with moisture barrier |
Performance
| AC rating | AC5 |
|---|---|
| Slip rating | P2 (AS 4586-2013) |
| Emissions | VOC < 0.05 ppm |
Warranty
| Residential | 25 years, wear and structural |
|---|---|
| Structural | Included in the 25-year residential warranty |
Subject to the manufacturer’s installation and care conditions.
Documents
Like this floor? We’ll measure up and quote it properly.