Prague
Light sandy natural oak with relaxed grain and a soft beige base; an easy, warm-neutral floor for family spaces.
- 6mm thick
- 0.5mm wear layer
- 230mm wide
- Satin
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesNot suitable
Not for bathrooms, toilets or laundries, and water damage from floods or leaks isn't covered by the warranty.
- Underfloor heatingWith conditions
Suits underfloor heating with a 27°C maximum and a gradual warm-up; check your heating system with us before you order.
- Sanding & refinishingNot applicable
Hybrid has a printed design layer under its wear layer, so it can't be sanded or refinished.
- Pets & high trafficA good choice
Suits homes with pets; the thinner 6mm board is best for light to moderate traffic.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published for this floor, so check with us and your strata by-laws before choosing it for an apartment.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
Light sandy natural oak with relaxed grain and a soft beige base; an easy, warm-neutral floor for family spaces.
Hybrid Fusion is an entry-level hybrid, sold on FlooringZone as Hybrid XL 6mm. The plank is 230mm wide, 1520mm long and 6mm thick, with an underlay already fixed to the back and a click profile for a floating install. A printed timber image sits under a 0.5mm wear layer with a satin, embossed surface, so it reads as timber without the upkeep. The core is water-resistant: the plank won't swell, so spills and mopping are fine. At 6mm it suits renovations where floor height matters, but it needs a flat subfloor (2mm in 2m) and covers tile grout lines only up to 4mm. Not for bathrooms, toilets or laundries, and never glue it down. Clever offers a 30-year residential warranty plus a 10-year surface water warranty for spills from above, subject to the manufacturer's installation and care conditions. Steam mops void it.
Full specifications
Dimensions
| Thickness | 6mm |
|---|---|
| Width | 230mm |
| Length | 1520mm |
| Pack size | 2.098 m² |
| Boards per pack | 6 |
Construction
| Construction | Hybrid (rigid core) with attached underlay |
|---|---|
| Core | Water-resistant core |
| Wear layer | 0.5mm |
Surface
| Finish | Satin |
|---|---|
| Surface | Emboss (grain-matched) |
Installation
| Profile / locking | Click |
|---|---|
| Installation methods | floating |
Performance
| Slip rating | P3 |
|---|---|
| Emissions | E0 |
| Certification | Fire rated |
Warranty
| Residential | 30 years |
|---|---|
| Commercial | 5 years (medium commercial) |
Subject to the manufacturer’s installation and care conditions.
Like this floor? We’ll measure up and quote it properly.