Hybrid Fusion is an entry-level hybrid, sold on FlooringZone as Hybrid XL 6mm. The plank is 230mm wide, 1520mm long and 6mm thick, with an underlay already fixed to the back and a click profile for a floating install. A printed timber image sits under a 0.5mm wear layer with a satin, embossed surface, so it reads as timber without the upkeep. The core is water-resistant: the plank won’t swell, so spills and mopping are fine. At 6mm it suits renovations where floor height matters, but it needs a flat subfloor (2mm in 2m) and covers tile grout lines only up to 4mm. Not for bathrooms, toilets or laundries, and never glue it down. Clever offers a 30-year residential warranty plus a 10-year surface water warranty for spills from above, subject to the manufacturer’s installation and care conditions. Steam mops void it.
Hybrid Fusion 6mm
Slim 6mm hybrid plank with built-in underlay, 230 x 1520mm, satin embossed finish.

- 6mm thick
- 0.5mm wear layer
- 230mm wide
- Satin
Range specifications
Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.
Dimensions
| Thickness | 6mm |
|---|---|
| Width | 230mm |
| Length | 1520mm |
| Pack size | 2.098 m² |
| Boards per pack | 6 |
Construction
| Construction | Hybrid (rigid core) with attached underlay |
|---|---|
| Core | Water-resistant core |
| Wear layer | 0.5mm |
Surface
| Finish | Satin |
|---|---|
| Surface | Emboss (grain-matched) |
Installation
| Profile / locking | Click |
|---|---|
| Installation methods | floating |
Performance
| Slip rating | P3 |
|---|---|
| Emissions | E0 |
| Certification | Fire rated |
Warranty
| Residential | 30 years |
|---|---|
| Commercial | 5 years (medium commercial) |
Subject to the manufacturer’s installation and care conditions.
Will it suit your home?
- Bathrooms & laundriesNot suitable
Not for bathrooms, toilets or laundries, and water damage from floods or leaks isn't covered by the warranty.
- Underfloor heatingWith conditions
Suits underfloor heating with a 27°C maximum and a gradual warm-up; check your heating system with us before you order.
- Sanding & refinishingNot applicable
Hybrid has a printed design layer under its wear layer, so it can't be sanded or refinished.
- Pets & high trafficA good choice
Suits homes with pets; the thinner 6mm board is best for light to moderate traffic.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published for this floor, so check with us and your strata by-laws before choosing it for an apartment.
Documents
Colours
Every colour, side by side.
Timber and timber-look floors vary board to board and batch to batch. See the real boards in a showroom before you choose.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Not sure between ranges?
Tell us about the room and we’ll suggest three floors that suit.
Like this floor? We’ll measure up and quote it properly.






