LooseLay Longboard is the long-plank version of this loose-lay vinyl: 1500mm by 250mm, 4.5mm thick, with a 0.55mm wear layer and no bevel. The longer board shows more grain and suits larger rooms. Designs lean towards Australian timbers, including Tasmanian Oak, Blackbutt, Spotted Gum, Ironbark and Wormy Chestnut, alongside oaks and pines. A friction-grip backing holds it flat without full-spread adhesive, and single planks can be swapped out. The plank won’t swell, so spills and mopping are fine, but it is not a waterproofing layer and sunny glazing may need adhesive and UV protection. Underfloor heating is fine up to a 27°C floor surface. Lifetime residential warranty, which the manufacturer defines as 35 years, with 15 years commercial, subject to its installation and care conditions.
LooseLay Longboard
4.5mm loose-lay vinyl in long 1500 x 250mm planks, many Australian species looks. 0.55mm wear layer.
- 4.5mm thick
- 0.55mm wear layer
- 250mm wide
Range specifications
Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.
Dimensions
| Thickness | 4.5mm |
|---|---|
| Width | 250mm |
| Length | 1500mm |
Construction
| Construction | Flexible luxury vinyl (LVT), printed design under a clear PVC wear layer, K-Wave friction-grip backing |
|---|---|
| Wear layer | 0.55mm |
Surface
| Edge | Square (no bevel) |
|---|
Installation
| Profile / locking | None: loose-lay friction-grip backing |
|---|---|
| Installation methods | loose-lay (no full-spread adhesive); adhesive may be needed near large sunny glazing |
Warranty
| Residential | Lifetime (35 years), residential; transfers with the property if the new owner has the original invoice |
|---|---|
| Commercial | 15 years (heavy, general or moderate duty) |
Subject to the manufacturer’s installation and care conditions.
Will it suit your home?
- Bathrooms & laundriesNot confirmed yet
Check with us before choosing this for a bathroom or laundry; water can travel under loose-laid planks, so it depends on the room.
- Underfloor heatingWith conditions
Suits underfloor heating that keeps the floor surface at 27°C or below; avoid rubber-backed rugs, which can cause hot spots.
- Sanding & refinishingNot applicable
Vinyl has a printed design layer under its wear layer, so it can't be sanded or refinished.
- Pets & high trafficA good choice
A 0.55mm wear layer backed by a 15-year commercial warranty, so it suits pets and busy homes; use felt pads and castor cups.
- Apartments (acoustic)Rating not confirmed
Vinyl on its own may not meet apartment noise rules, so strata will need test results for your exact floor; check with us first.
Documents
Colours
Every colour, side by side.
Timber and timber-look floors vary board to board and batch to batch. See the real boards in a showroom before you choose.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Not sure between ranges?
Tell us about the room and we’ll suggest three floors that suit.
Like this floor? We’ll measure up and quote it properly.