Arlo

14mm European oak click plank, 1900 x 190mm, 3mm top layer; Lakewood’s likely successor.

14mm thick
3mm top layer
190mm wide
Klumpp 8% matte UV lacquer

Range specifications

Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.

Dimensions

Thickness	14mm
Width	190mm
Length	1900mm
Pack size	2.888 m²
Boards per pack	8

Construction

Species	European Oak
Construction	Engineered, 3-layer, 1-strip
Core	SPF (softwood)
Top layer	3mm

Surface

Finish	Klumpp 8% matte UV lacquer
Edge	Micro bevel

Installation

Profile / locking	Välinge 5G click
Installation methods	floating direct stick (Swedish Dynea adhesive)

Performance

Slip rating	AS 4586-2013: wet P4, dry D1
Emissions	ASTM D5116-25: formaldehyde not detected; environmental rating A+; GBCA pass
Certification	PEFC; EUTR legally harvested

Warranty

Residential	20 years wear
Commercial	5 years wear
Structural	Lifetime

Subject to the manufacturer’s installation and care conditions.

Arlo is a 14mm engineered European oak plank, 1900 x 190mm, with a 3mm oak top layer and a Välinge 5G click system for a quicker floating install. It matches the size, top layer and click system of the earlier Lakewood board, and shares two of its colour names. The finish is Klumpp UV lacquer at 8% sheen, with micro-bevelled edges. Eight colours range from near-white and blonde oaks through smoked and beige tones to the deeper, warm Havana. Arlo can float over the approved underlay or be glued direct, and it is rated for in-slab hydronic heating within the manufacturer’s limits. It is not for bathrooms, laundries or steamy rooms; keep the home between 15 and 25 °C and 30–65% humidity. The timber is PEFC certified. Warranty is lifetime structural with 20 years residential wear (5 years commercial), subject to the manufacturer’s installation and care conditions.

Will it suit your home?

Bathrooms & laundriesNot suitable
Not for bathrooms, laundries or steamy rooms; flooding, leaks and subfloor moisture aren't covered by the warranty.
Underfloor heatingWith conditions
Suits in-slab hydronic heating only, with the slab surface kept at 26°C or below; other heating types aren't recommended.
Sanding & refinishingNot confirmed yet
Engineered boards can usually be sanded a few times, but check with us first so refinishing doesn't affect your warranty.
Pets & high trafficWith care
The hard matt lacquer resists wear, but claw scratches, dents and pet accidents aren't covered, so use felt pads and mats.
Apartments (acoustic)Rating not confirmed
No acoustic test results are published, so strata will need results for your exact floor and underlay; check with us first.