Showrooms

Brookvale

3/764 Pittwater Rd · Open today until 5pm

CallEmailDirections

Leichhardt

577 Parramatta Rd · Open today until 5pm

CallEmailDirections

Bondi Junction

1/64 Bronte Rd · Coming soon

CallEmailDirections

[email protected] · Privacy

Rawma

Rawma’s chevron looks close to raw timber. Pale blonde blocks shift gently in colour, the grain is fine, and the whole floor feels light and open.

  • 15mm thick
  • 4mm top layer
  • 120mm wide
  • Grade Signature
  • WOCA UV oil, wire-brushed

This floor will be added to your booking.

Visit a showroom

Call ahead and we’ll confirm which showroom has it on display.

Will it suit your home?

Straight answers, from the manufacturer’s own documents.

  • Bathrooms & laundriesNot suitable

    Not for bathrooms, toilets or rooms with a floor waste, and moisture damage isn't covered; kitchens are fine.

  • Underfloor heatingNot suitable

    Not for underfloor heating; in this collection only the 20mm Largo board can go over a heated floor.

  • Sanding & refinishingNot confirmed yet

    The top layer is thick enough to sand, but check with us first so refinishing doesn't affect your warranty.

  • Pets & high trafficWith care

    Oak dents and scratches more easily than Australian hardwoods, but the brushed, oiled surface hides fine marks and can be spot-repaired.

  • Apartments (acoustic)Rating not confirmed

    No acoustic test results are published; glued pattern floors in apartments need a tested acoustic underlay system, so check with us first.

Conditions apply; we’ll confirm for your room at the measure.

About this floor

Rawma's chevron looks close to raw timber. Pale blonde blocks shift gently in colour, the grain is fine, and the whole floor feels light and open.

Plank's chevron is made from 600mm by 120mm angled boards of 15mm engineered European oak with a 4mm solid oak top layer. The ends meet in a clean V, which draws the eye along a room and works well in halls and long living spaces. All 13 oak colours are available in chevron, wire-brushed and finished in WOCA UV oil like the rest of the range. It is glued down with a solvent-free moisture-curing PU adhesive rather than floated, and it is not approved over underfloor heating. Chevron needs an experienced installer and extra material, because offcuts lose their factory angle; minimum order quantities apply unless stock is on hand. Not for bathrooms, toilets or rooms with a floor waste. Backed by a 25-year structural warranty for homes, subject to the manufacturer's installation and care conditions.

Full specifications

Dimensions
Thickness15mm
Width120mm
Length600mm
Pack size0.864 m²
Construction
SpeciesEuropean oak (Quercus robur)
ConstructionMulti-layer engineered: solid oak top layer on a cross-laminated plywood core
CorePlywood, cross-laminated
Top layer4mm
GradeSignature
Surface
FinishWOCA UV oil, wire-brushed
SurfaceWire-brushed
EdgeMicro-bevel, 4 sides
Installation
Profile / lockingTongue and groove
Installation methodsdirect-stick (fully bonded, solvent-free moisture-curing PU adhesive only)
Performance
Slip ratingP3 (AS 4586 wet pendulum)
EmissionsE1 formaldehyde class, 0.007 mg/m²/hr; TVOC 0.011 mg/m²/hr
CertificationFSC-certified timber available on request
Warranty
Residential25 years structural (warping/twisting), original purchaser; no separate finish warranty
Commercial7 years structural
Structural25 years residential / 7 years commercial

Subject to the manufacturer’s installation and care conditions.

Documents

Like this floor? We’ll measure up and quote it properly.