French Grey
- 14mm thick
- 3mm top layer
- 148mm wide
- Klumpp 8% matte UV lacquer
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesNot suitable
Not for bathrooms, laundries or steamy rooms; flooding, leaks and subfloor moisture aren't covered by the warranty.
- Underfloor heatingWith conditions
Suits in-slab hydronic heating only, with the slab surface kept at 26°C or below; other heating types aren't recommended.
- Sanding & refinishingNot confirmed yet
Engineered boards can usually be sanded a few times, but check with us first so refinishing doesn't affect your warranty.
- Pets & high trafficWith care
The hard matt lacquer resists wear, but claw scratches, dents and pet accidents aren't covered, so use felt pads and mats.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published, so strata will need results for your exact floor and underlay; check with us first.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
Arlo Herringbone is a 14mm engineered European oak block, 888 x 148mm, with a 3mm oak top layer on a multi-ply core, tongue-and-groove joins and micro-bevelled edges. It is finished in Klumpp UV lacquer at 8% sheen. The block size matches the earlier Lakewood Herringbone, and four of its colour names carry over: Dove Grey, Magnolia, French Grey and Onyx Pearl, joined by Ivory. The five colours run from pale, Nordic-style tones to a deep chocolate brown. Arlo Herringbone must be glued direct to the subfloor; it can't float. It is rated for in-slab hydronic heating within the manufacturer's limits. Not for bathrooms, laundries or steamy rooms. Herringbone takes longer to lay and creates more offcuts than plank. The timber is PEFC certified. Warranty is lifetime structural with 20 years residential wear (5 years commercial), subject to the manufacturer's installation and care conditions.
Full specifications
Dimensions
| Thickness | 14mm |
|---|---|
| Width | 148mm |
| Length | 888mm |
| Pack size | 1.051 m² |
| Boards per pack | 8 |
Construction
| Species | European Oak |
|---|---|
| Construction | Engineered parquetry block |
| Core | Multi-ply |
| Top layer | 3mm |
Surface
| Finish | Klumpp 8% matte UV lacquer |
|---|---|
| Edge | Micro bevel |
Installation
| Profile / locking | Tongue & groove |
|---|---|
| Installation methods | direct stick only (fully bonded, Swedish Dynea adhesive) |
Performance
| Slip rating | AS 4586-2013: wet P4, dry D1 |
|---|---|
| Emissions | ASTM D5116-25: formaldehyde not detected; environmental rating A+; GBCA pass |
| Certification | PEFC; EUTR legally harvested |
Warranty
| Residential | 20 years wear |
|---|---|
| Commercial | 5 years wear |
| Structural | Lifetime |
Subject to the manufacturer’s installation and care conditions.
Documents
Like this floor? We’ll measure up and quote it properly.