Cayman Oak
Sun-bleached light oak gives Cayman Oak’s herringbone a relaxed, seaside freshness that sits naturally in coastal homes.
- 7mm thick
- 0.5mm wear layer
- 125mm wide
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesNot suitable
Not for bathrooms, laundries or other moisture-prone rooms; the surface guarantee covers normal household spills only.
- Underfloor heatingNot suitable
Underfloor heating isn't recommended for this floor; talk to us about a heating-friendly alternative.
- Sanding & refinishingNot applicable
Hybrid has a printed design layer under its wear layer, so it can't be sanded or refinished.
- Pets & high trafficA good choice
A rigid core with a 0.5mm wear layer suits busy homes and pets, though scratches, dents and pet accidents aren't covered by warranty.
- Apartments (acoustic)Check strata rules
Field-tested over a concrete slab, but strata approval depends on your building and the required underlay, so check with us first.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
Sun-bleached light oak gives Cayman Oak's herringbone a relaxed, seaside freshness that sits naturally in coastal homes.
This range brings the herringbone pattern to a hybrid floor. Each block is 625 × 125 × 7mm, with a 5.5mm SPC rigid core, a 0.5mm wear layer and an attached 1.5mm IXPE underlay, joined by a click profile so the pattern floats rather than being glued. The same block is now sold as Lumière Herringbone, in the same twelve colours as the Lumière plank, so herringbone and plank can be matched room to room. The colours run from pale and grey-washed oaks to deep browns, Spotted Gum and Blackbutt. The block won't swell, so spills and mopping are fine, but it is not permitted in bathrooms or laundries and is not recommended over underfloor heating. The warranty only applies when it is laid in herringbone over a 3–5mm solid rubber underlay, so we check the underlay with the supplier for every quote. Warranty: lifetime (25-year limited) structural and 20-year residential coating, subject to the manufacturer's installation and care conditions.
Full specifications
Dimensions
| Thickness | 7mm |
|---|---|
| Width | 125mm |
| Length | 625mm |
| Pack size | 1.406 m² |
| Boards per pack | 18 |
Construction
| Construction | SPC rigid core hybrid: 5.5mm SPC (incl. 0.5mm wear layer) + 1.5mm attached IXPE underlay |
|---|---|
| Core | SPC (stone-plastic composite), 5.5mm |
| Wear layer | 0.5mm |
Surface
| Surface | Printed timber decor, ultra-matte coating with detailed texture |
|---|
Installation
| Profile / locking | 5G click |
|---|---|
| Installation methods | floating, herringbone pattern only, over 3–5mm solid rubber underlay (warranty condition) |
Performance
| Slip rating | P3 |
|---|---|
| Acoustic | AAAC 5★ (L'nT,w 40, FIIC 69) (tested: Field test, Koikas Acoustics, 4 Oct 2022: 7mm sample of this floor over a ~180–200mm concrete slab; ceiling type not recorded; no added underlay) |
| Emissions | VOC E0 |
Warranty
| Residential | Lifetime (25 years limited) structural; 20-year coating |
|---|---|
| Commercial | 10 years structural; 10-year coating |
| Structural | Lifetime (25 years limited) residential; 10 years commercial |
Subject to the manufacturer’s installation and care conditions.
Documents
Like this floor? We’ll measure up and quote it properly.