Bianche
Bianche lays light, caramel-warmed oak into a chevron, keeping the arrow pattern bright. White walls and timber joinery both suit it.
- 15mm thick
- 4mm top layer
- 120mm wide
- Grade Signature
- WOCA UV oil, wire-brushed
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesNot suitable
Not for bathrooms, toilets or rooms with a floor waste, and moisture damage isn't covered; kitchens are fine.
- Underfloor heatingNot suitable
Not for underfloor heating; in this collection only the 20mm Largo board can go over a heated floor.
- Sanding & refinishingNot confirmed yet
The top layer is thick enough to sand, but check with us first so refinishing doesn't affect your warranty.
- Pets & high trafficWith care
Oak dents and scratches more easily than Australian hardwoods, but the brushed, oiled surface hides fine marks and can be spot-repaired.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published; glued pattern floors in apartments need a tested acoustic underlay system, so check with us first.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
Bianche lays light, caramel-warmed oak into a chevron, keeping the arrow pattern bright. White walls and timber joinery both suit it.
Plank's chevron is made from 600mm by 120mm angled boards of 15mm engineered European oak with a 4mm solid oak top layer. The ends meet in a clean V, which draws the eye along a room and works well in halls and long living spaces. All 13 oak colours are available in chevron, wire-brushed and finished in WOCA UV oil like the rest of the range. It is glued down with a solvent-free moisture-curing PU adhesive rather than floated, and it is not approved over underfloor heating. Chevron needs an experienced installer and extra material, because offcuts lose their factory angle; minimum order quantities apply unless stock is on hand. Not for bathrooms, toilets or rooms with a floor waste. Backed by a 25-year structural warranty for homes, subject to the manufacturer's installation and care conditions.
Full specifications
Dimensions
| Thickness | 15mm |
|---|---|
| Width | 120mm |
| Length | 600mm |
| Pack size | 0.864 m² |
Construction
| Species | European oak (Quercus robur) |
|---|---|
| Construction | Multi-layer engineered: solid oak top layer on a cross-laminated plywood core |
| Core | Plywood, cross-laminated |
| Top layer | 4mm |
| Grade | Signature |
Surface
| Finish | WOCA UV oil, wire-brushed |
|---|---|
| Surface | Wire-brushed |
| Edge | Micro-bevel, 4 sides |
Installation
| Profile / locking | Tongue and groove |
|---|---|
| Installation methods | direct-stick (fully bonded, solvent-free moisture-curing PU adhesive only) |
Performance
| Slip rating | P3 (AS 4586 wet pendulum) |
|---|---|
| Emissions | E1 formaldehyde class, 0.007 mg/m²/hr; TVOC 0.011 mg/m²/hr |
| Certification | FSC-certified timber available on request |
Warranty
| Residential | 25 years structural (warping/twisting), original purchaser; no separate finish warranty |
|---|---|
| Commercial | 7 years structural |
| Structural | 25 years residential / 7 years commercial |
Subject to the manufacturer’s installation and care conditions.
Documents
More in this range
Like this floor? We’ll measure up and quote it properly.