Gris
In herringbone, the moody mix of dark grey and chocolate in Gris makes a strong statement. Give it a larger room with good light to show its depth.
- 15mm thick
- 4mm top layer
- 90mm wide
- Grade Signature
- WOCA UV oil, wire-brushed
This floor will be added to your booking.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Will it suit your home?
Straight answers, from the manufacturer’s own documents.
- Bathrooms & laundriesNot suitable
Not for bathrooms, toilets or rooms with a floor waste, and moisture damage isn't covered; kitchens are fine.
- Underfloor heatingNot suitable
Not for underfloor heating; in this collection only the 20mm Largo board can go over a heated floor.
- Sanding & refinishingNot confirmed yet
The top layer is thick enough to sand, but check with us first so refinishing doesn't affect your warranty.
- Pets & high trafficWith care
Oak dents and scratches more easily than Australian hardwoods, but the brushed, oiled surface hides fine marks and can be spot-repaired.
- Apartments (acoustic)Rating not confirmed
No acoustic test results are published; glued pattern floors in apartments need a tested acoustic underlay system, so check with us first.
Conditions apply; we’ll confirm for your room at the measure.
About this floor
In herringbone, the moody mix of dark grey and chocolate in Gris makes a strong statement. Give it a larger room with good light to show its depth.
Plank's herringbone uses 540mm by 90mm blocks of 15mm engineered European oak with a 4mm solid oak top layer, laid in the classic staggered zigzag. Every one of the 13 oak colours is offered in this format, finished the same way as the planks: wire-brushed and coated in WOCA UV oil, with micro-bevelled tongue-and-groove edges. The narrow block suits hallways, period homes and rooms where a pattern adds interest without a busy colour. Herringbone is fixed down with a solvent-free moisture-curing PU adhesive, not floated, and it is not approved over underfloor heating. Pattern laying takes longer and uses more material than straight boards, and minimum order quantities apply unless stock is on hand. Not for bathrooms, toilets or rooms with a floor waste. Backed by a 25-year structural warranty for homes, subject to the manufacturer's installation and care conditions.
Full specifications
Dimensions
| Thickness | 15mm |
|---|---|
| Width | 90mm |
| Length | 540mm |
| Pack size | 1.166 m² |
Construction
| Species | European oak (Quercus robur) |
|---|---|
| Construction | Multi-layer engineered: solid oak top layer on a cross-laminated plywood core |
| Core | Plywood, cross-laminated |
| Top layer | 4mm |
| Grade | Signature |
Surface
| Finish | WOCA UV oil, wire-brushed |
|---|---|
| Surface | Wire-brushed |
| Edge | Micro-bevel, 4 sides |
Installation
| Profile / locking | Tongue and groove |
|---|---|
| Installation methods | direct-stick (fully bonded, solvent-free moisture-curing PU adhesive only) |
Performance
| Slip rating | P3 (AS 4586 wet pendulum) |
|---|---|
| Emissions | E1 formaldehyde class, 0.007 mg/m²/hr; TVOC 0.011 mg/m²/hr |
| Certification | FSC-certified timber available on request |
Warranty
| Residential | 25 years structural (warping/twisting), original purchaser; no separate finish warranty |
|---|---|
| Commercial | 7 years structural |
| Structural | 25 years residential / 7 years commercial |
Subject to the manufacturer’s installation and care conditions.
Like this floor? We’ll measure up and quote it properly.