Excellence is a 12mm laminate for homes and light commercial use, rated AC4, with an aluminium-oxide wear layer over an E1 HDF core. Boards are 2250mm long and 193mm wide, with bevelled edges, a drop-lock joining system and embossing that follows the printed grain. Eight colours run from the pale, sun-faded Dover through golden Australian species looks to the deep brown Dusky, with a salvaged-timber look in Nomad. The surface is water-resistant to everyday spills, but it is not for bathrooms, laundries or steamy rooms, and steam mops void the warranty. It floats over the approved underlay and suits in-slab hydronic heating within the manufacturer’s limits. Keep the home between 15 and 25 °C and 30–70% humidity. Warranty is lifetime structural, 25 years residential wear and 5 years commercial, subject to the manufacturer’s installation and care conditions.
Excellence Laminate
12mm AC4 laminate, 2250mm boards, drop-lock, eight colours; for dry living areas.

- 12mm thick
- 193mm wide
- Aluminium oxide wear layer
Range specifications
Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.
Dimensions
| Thickness | 12mm |
|---|---|
| Width | 193mm |
| Length | 2250mm |
| Pack size | 1.755 m² |
| Boards per pack | 4 |
Construction
| Construction | Laminate |
|---|---|
| Core | HDF, E1 |
Surface
| Finish | Aluminium oxide wear layer |
|---|---|
| Surface | Registered / natural embossing |
| Edge | Bevelled |
Installation
| Profile / locking | Drop lock |
|---|---|
| Installation methods | floating over EvaLay 2 or 3mm underlay with moisture barrier |
Performance
| AC rating | AC4 light commercial (AS/NZS 4266.20:2004) |
|---|---|
| Slip rating | AS 4586-2013 Amdt 1-2017 App. A: P3, dry D1 |
| Emissions | ASTM D5116: formaldehyde 0.008 mg/m2/hr; TVOC 0.005 mg/m2/hr; environmental rating A+; GBCA pass; core E1 |
Warranty
| Residential | 25 years wear |
|---|---|
| Commercial | 5 years wear |
| Structural | Lifetime |
Subject to the manufacturer’s installation and care conditions.
Will it suit your home?
- Bathrooms & laundriesNot suitable
Not for bathrooms, laundries or steamy rooms; flooding, leaks and spills such as pet urine aren't covered by the warranty.
- Underfloor heatingWith conditions
Suits in-slab hydronic heating only, with the slab surface kept at 26°C or below; other heating types aren't recommended.
- Sanding & refinishingNot applicable
Laminate has a printed design layer under its wear surface, so it can't be sanded or refinished.
- Pets & high trafficWith care
AC4 copes with busy homes, but the warranty doesn't cover claw scratches, dents or pet accidents, so use mats and felt pads.
- Apartments (acoustic)Check strata rules
Tested with the matching underlay, but full test details aren't published, so check with us and your strata before choosing it for an apartment.
Documents
Colours
Every colour, side by side.
Timber and timber-look floors vary board to board and batch to batch. See the real boards in a showroom before you choose.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Not sure between ranges?
Tell us about the room and we’ll suggest three floors that suit.
Like this floor? We’ll measure up and quote it properly.






