A 9mm rigid-core hybrid on a long, wide board: 228mm by 1800mm, with a 2mm acoustic underlay attached and a 0.5mm wear layer. The bigger board means fewer joins across a room, and micro-bevelled edges give each plank a defined outline. Colours run from pale ash and limed grey through blackbutt and spotted gum to charcoal. The plank won’t swell, so spills and mopping are fine, but don’t leave water standing, as it can get through the joins. It floats on a click system over flat concrete or timber subfloors. It suits open-plan living, kitchens and busy family homes. There’s no published wet-area guidance, and heating is listed as suitable only with conditions that haven’t been published, so talk to us before planning it for a bathroom, laundry or heated floor. Apartments need strata approval and a test report for the building. Warranty: 20 years residential, 3 years commercial and lifetime structural, subject to the manufacturer’s installation and care conditions.
Hybrid 9mm
9mm rigid-core hybrid, 228 x 1800mm boards with 2mm attached underlay, in oak, gum and grey looks.

- 9mm thick
- 0.5mm wear layer
- 228mm wide
Range specifications
Shared by every colour in this range, from the supplier’s brochure, installation guide and warranty.
Dimensions
| Thickness | 9mm |
|---|---|
| Width | 228mm |
| Length | 1800mm |
Construction
| Construction | Rigid core hybrid; attached acoustic underlay |
|---|---|
| Core | Rigid core |
| Wear layer | 0.5mm |
Surface
| Edge | Micro bevel |
|---|
Installation
| Profile / locking | Click-lock |
|---|---|
| Installation methods | floating |
Performance
| Slip rating | P4 |
|---|
Warranty
| Residential | 20 years |
|---|---|
| Commercial | 3 years |
| Structural | Lifetime |
Subject to the manufacturer’s installation and care conditions.
Will it suit your home?
- Bathrooms & laundriesNot confirmed yet
Check with us before choosing this for a bathroom or laundry; it depends on the room, including whether it has a floor waste.
- Underfloor heatingNot confirmed yet
Talk to us before choosing this over underfloor heating; we'll get the system, temperature and installation conditions in writing first.
- Sanding & refinishingNot applicable
Hybrid has a printed design layer under its wear layer, so it can't be sanded or refinished.
- Pets & high trafficA good choice
A 0.5mm wear layer suits pets and busy homes, and the surface has good slip resistance (P4).
- Apartments (acoustic)Check strata rules
It has an attached underlay, but apartments still need strata approval and test results for your building, so check with us first.
Documents
Colours
Every colour, side by side.
Timber and timber-look floors vary board to board and batch to batch. See the real boards in a showroom before you choose.
Visit a showroom
- Brookvale3/764 Pittwater Rd, Brookvale NSW 2100Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Leichhardt577 Parramatta Rd, Leichhardt NSW 2040Open today until 5pm1800 577 313sales@flooringzone.com.auDirections
- Bondi Junction1/64 Bronte Rd, Bondi Junction NSW 2022Coming soon1800 577 313bondi@flooringzone.com.auDirections
Call ahead and we’ll confirm which showroom has it on display.
Not sure between ranges?
Tell us about the room and we’ll suggest three floors that suit.
Like this floor? We’ll measure up and quote it properly.







