Flooring services · Sydney
From the first measure to the last trim.
One team for the measure, the prep, the install and the finish. We supply and install new floors, and we sand, repair and refinish the ones you already have.
What we do
Eight services, one team.
01
Measure & Quote
A flooring specialist comes to your home, measures every room and checks the subfloor for level and moisture. We’ll ask about pets, kids, heating and strata, because they change what we’d recommend.
- Every room measured, including stairs and doorways
- Subfloor checked for level and moisture
- A quote covering the floor, the prep and the install
02
Supply & Install
We supply the floor and our installers lay it: floating, glued down or nailed, depending on the board and your subfloor. We follow each manufacturer’s installation guide, because that’s what keeps the manufacturer’s warranty valid.
- Hybrid, laminate, vinyl, engineered oak, solid timber and carpet
- Floating, glue-down or nailed, to suit the board and subfloor
- Trims and transitions finished to match the floor
03
Sanding & Polishing
Solid timber can usually be sanded back and recoated several times, so tired floorboards often need a sand rather than a new floor. We check how much timber is left first.
- Boards sanded back to bare timber
- Damaged boards and gaps dealt with before coating
- Matt, satin or gloss finish to suit the room
04
Restoration & Repair
Water-stained boards, a cupped section, gaps that keep growing or a click floor coming apart: we’ll inspect it and tell you whether it’s a repair or a replacement. We look for the cause first, such as a leak, damp subfloor or blocked expansion gap, because fixing the boards without fixing the cause doesn’t last.
- Water damage, cupping, gaps and lifting boards
- The cause found and fixed before the boards
- Replacement boards matched where the range is still available
05
Custom Stairs
Stairs are where a new floor looks finished or unfinished. We clad treads and risers to match your new floor, with stair nosings in the same colour where the range offers them, so the line carries from the floor up the stairs.
- Treads and risers clad to match your floor
- Matching stair nosings where the range offers them
- Floor and stairs done as one job
06
Subfloor Prep & Levelling
Most flooring problems start underneath. Floating floors need a flat base, vinyl needs a very flat one, and timber on a slab needs the slab dry.
- Grinding and self-levelling for concrete slabs
- Moisture testing before timber goes down
- Loose or uneven timber subfloors re-fixed and packed
07
Floor Removal
Carpet always comes up before a new floor goes down, and old tiles or timber often do too. We’ll tell you at the measure what needs to come up and why.
- Carpet, underlay and gripper strips
- Old tiles, vinyl or timber where needed
- Agreed at the measure, so there are no surprises on the day
08
Acoustic / Apartment Floors
In NSW, a new hard floor in a strata building is a minor renovation that needs owners corporation approval. Your by-laws usually set an acoustic rating, often stricter than the building code.
- Acoustic underlays chosen to meet your by-law rating
- Product details ready for your strata application
- Advice on what your building is likely to ask for
How it works
A measure & quote, start to finish.
01
Book a time
Tell us the rooms and roughly when you want the floor in. We’ll confirm a time that suits you.
02
We measure and check the subfloor
A flooring specialist measures every room, checks the subfloor for level and moisture, and talks through what suits your home, pets and strata rules.
03
You get a written quote
Floor, underlay, preparation, removal and trims, itemised. No surprises on the day.
Ready when you are
Bring us the room. We’ll bring the floor.
Book a measure at home, or bring a photo and rough measurements to any showroom.